www.wifithoughts.com

[rqf4]

Initial set up worked great following "EnGenius 2610 / 1650 client router configuration" at http://www.wifithoughts.com/engenius_eoc-2610_eoc1650_bridge_router_configuration.htm

Recently lost access. Power and LAN lights on but browser can not find 2610 at 192.168.1.1 (or at 192.168.123.1). Have 'reset' 2610.

Any ideas?

[rqf4]

Ran Engenius Locator Software to no avail.

To clarify, LAN led is on when connected to the computer and computer is running, goes off when comp goes to sleep. So it appears as though the 2610 is recognizing that it is networked but I just cant find it!

What gives??

[keenanj]

try the hard reset again press and hold reset buttong then apply power release after 30 seconds.


You will then have to set your computers address to static 192.168.1.100 and access the 2610 at 192.168.1.1.